Product Overview
Century HST150 Centurion PRO Motors 1.5 HP Pool Pump Motor 1 phase 3600 RPM 230/115 V 56J Frame
KEY FEATURES
- Premium Sealed 203 Bearings Both Ends
- Open & Accessible Terminal Board & Wiring Compartment For Easy Installation
- New Triple Seal Protection on Pump-End Bearing
- Voltage Change Device
- Definitive Shaft Access (7/16" Wrench)
- UL 1081 Design
- 50°C Ambient
- 303 Stainless Steel Shaft
- Centurion PRO
- Title 20 CCR section 1605.3(g)(5): We are unable to ship this product to California
- Downloads:
- HST150 Data Pack
General Specifications
| UPC: | 786674069801 | Weight: | 29.00 LB |
| Packaged Length: | 15.98 IN | Packaged Width: | 9.13 IN |
| Packaged Height: | 9.02 IN |
Nameplate Specifications
| Output HP: | 1.5 Hp | Output KW: | 1.1 kW |
| Frequency: | 60 Hz | Voltage: | 230/115 V |
| Current: | 8.6/17.2 A | Speed: | 3450 rpm |
| Service Factor: | 1 | Phase: | 1 |
| Duty: | Continuous | Insulation Class: | F |
| Frame: | 56J | Enclosure: | Open Drip Proof |
| Thermal Protection: | Automatic | Ambient Temperature: | 50 °C |
| UL: | Recognized | CSA: | Y |
| Number of Speeds: | 1 |
Technical Specifications
| Electrical Type: | Capacitor Start Induction Run | Poles: | 2 |
| Rotation: | Counterclockwise Pump End | Mounting: | Round |
| Motor Orientation: | Horizontal | Drive End Bearing: | Ball |
| Opp Drive End Bearing: | Ball | Frame Material: | Rolled Steel |
| Shaft Type: | 7/16 Threaded | Overall Length: | 14.41 in |
| Frame Length: | 8.38 in | Shaft Diameter: | 0.625 in |
| Shaft Extension: | 2.562 in |
