- OEM Direct Replacement Motor
- 5" Diameter - 42 Frame
- Permanent Split Capacitor
- Thermally Protected
- Open Shaft End and Lead End End-Frame, Semi-Enclosed Shell, Air Over
- Class A Insulation, 40°C Ambient
- Sleeve Bearing
- 1/2" Diameter Double Shaft with Flat
- 23" Leads
- Two Extended Studs Lead End and Opposite Lead End
Double Shaft Extension. No bracket on motor, round body. Motor has 2 studs on each side of the motor (opposite on each side, spaced 2.25" On Center) Diameter = 4.75" Dimensions ref. (1) C = 14-3/4", BM = 3-5/8", N1 = 5-1/4", N = 5". Also replaces 322P664, 6747A311.
General Specifications
| UPC: | 786674028396 | Weight: | 9.00 LB |
| Packaged Length: | 16.87 IN | Packaged Width: | 6.31 IN |
| Packaged Height: | 6.31 IN |
Nameplate Specifications
| Output HP: | 1/4 Hp | Output KW: | 0.19 kW |
| Frequency: | 60 Hz | Voltage: | 115 V |
| Current: | 2.8 A | Speed: | 1625 rpm |
| Service Factor: | 1 | Phase: | 1 |
| Duty: | Air Over | Insulation Class: | A |
| Frame: | 42Y | Enclosure: | Open Enclosed |
| Thermal Protection: | Automatic | Ambient Temperature: | 40 °C |
| UL: | Recognized | CSA: | Y |
| CE: | N |
Technical Specifications
| Electrical Type: | Permanent Split Capacitor | Starting Method: | Induction Run |
| Poles: | 6 | Rotation: | Clockwise Lead End |
| Mounting: | Extended Studs | Motor Orientation: | Horizontal |
| Drive End Bearing: | Sleeve | Opp Drive End Bearing: | Sleeve |
| Frame Material: | Rolled Steel | Shaft Type: | Flat |
| Overall Length: | 14.43 in | Shaft Diameter: | 0.500 in |
| Shaft Extension: | 5.6 X.5 X5.3 in |
