- OEM Direct Replacement Motor
- 5" Diameter - 42 Frame
- Permanent Split Capacitor
- Thermally Protected
- Open Shaft End and Lead End End-Frame, Semi-Enclosed Shell, Air Over
- Class A Insulation, 40°C Ambient
- Sleeve Bearing
- 1/2" Diameter Double Shaft with Flat
- 23" Leads
- Mounting Bracket Shell Lead End and Opposite Shell Lead End
Dimensions ref. (1) C = 20-1/8", BM = 3-5/8", N1 = 5-3/8", N = 5-3/8". This is an aftermarket replacement motor. Be sure to review the specs and dimensions to your motor to verify it will work. This has also been used for 6757A313, 6757A311, K55HXJCP-2593, 322P708
General Specifications
| UPC: | 786674028402 | Weight: | 9.00 LB |
| Packaged Length: | 15.87 IN | Packaged Width: | 6.81 IN |
| Packaged Height: | 6.81 IN |
Nameplate Specifications
| Output HP: | 1/4 Hp | Output KW: | 0.19 kW |
| Frequency: | 60 Hz | Voltage: | 115 V |
| Current: | 3.1 A | Speed: | 1625 rpm |
| Service Factor: | 1 | Phase: | 1 |
| Duty: | Air Over | Insulation Class: | A |
| Frame: | 42Y | Enclosure: | Open Enclosed |
| Thermal Protection: | Automatic | Ambient Temperature: | 40 °C |
| UL: | Recognized | CSA: | Y |
| CE: | N |
Technical Specifications
| Electrical Type: | Permanent Split Capacitor | Starting Method: | Induction Run |
| Poles: | 4 | Rotation: | Clockwise Lead End |
| Mounting: | Special | Motor Orientation: | Horizontal |
| Drive End Bearing: | Sleeve | Opp Drive End Bearing: | Sleeve |
| Frame Material: | Rolled Steel | Shaft Type: | Flat |
| Overall Length: | 15.01 in | Shaft Diameter: | 0.500 in |
| Shaft Extension: | 5.7 X.5 X5.7 in |
