Product Overview
Eaton Wiring Devices RDC25-A Comb Dim/FanCntl Rotary Vari 2.5A300W AL
Eaton combination dimmer and fan speed control, Power failure memory, with preset, Fully variable, #16 AWG, 2.5A, 120V, Wire lead, Maintained closure, Almond, 60 Hz, Incandescent, halogen, 0° to 40°C, Single-pole, Polycarbonate, 300W
Eaton’s fan controls vary the speed of air flow and employ special circuitry to quiet the fan's motor at low speeds. Install the device in place of a standard switch to add convenient fan control with quiet, smooth actuation. Tri-combo and ground screws help allow easy accesibility and installation. The top and back body are virtually unbreakable, and the device features electrostatic discharge protection, radio frequency interface filtering, and power failure memory. Eaton fan controls are available with color change kits and are compatible with traditional-style or screwless wallplates.
| Allowable Wire Size | #16 AWG |
| Amperage Rating | 2.5 A |
| Closure Type | Maintained |
| Color | Almond |
| Environmental Conditions | Indoor |
| Frequency Rating | 60 Hz |
| Load Type | INC | HAL |
| Material | Polycarbonate |
| Mounting method | Flush |
| Mounting Type | Flush |
| Operating Temperature | 0 to 40 °C |
| Special Features | Power failure memory, with preset |
| Switch Type | Single-pole |
| Type | Fully variable |
| Voltage Rating | 120 V |
| Wattage | 300 W |
| Wiring Method | Wire lead |
| Length | 2.81 IN |
| Width | 1.91 IN |
| Height | 4.63 IN |
| Volume | 24.85 CI |
| Weight | 0.001 LB |
| Length | 2.81 IN |
| Width | 1.91 IN |
| Height | 4.63 IN |
| Weight | 0.001 LB |
|
|
