Product Overview
Eaton Wiring Devices RFS5-LA Fan Cont Rot Variable 5A 120V W/Trim LA
Eaton fan speed controller, Power failure memory, non-preset, Fully variable, #16 AWG, 5A, 120V, Wire lead, Maintained closure, Light almond, 60 Hz, Incandescent, halogen, 0° to 40°C, Single-pole, Polycarbonate
Eaton’s fan controls vary the speed of air flow and employ special circuitry to quiet the fan's motor at low speeds. Install the device in place of a standard switch to add convenient fan control with quiet, smooth actuation. Tri-combo and ground screws help allow easy accesibility and installation. The top and back body are virtually unbreakable, and the device features electrostatic discharge protection, radio frequency interface filtering, and power failure memory. Eaton fan controls are available with color change kits and are compatible with traditional-style or screwless wallplates.
| Allowable Wire Size | #16 AWG |
| Amperage Rating | 5 A |
| Closure Type | Maintained |
| Color | Light almond |
| Environmental Conditions | Indoor |
| Frequency Rating | 60 Hz |
| Load Type | INC | HAL |
| Material | Polycarbonate |
| Mounting method | Flush |
| Mounting Type | Flush |
| Operating Temperature | 0 to 40 °C |
| Special Features | Power failure memory, non-preset |
| Switch Type | Single-pole |
| Type | Fully variable |
| Voltage Rating | 120 V |
| Wiring Method | Wire lead |
| Length | 2.3 IN |
| Width | 3.08 IN |
| Height | 4.75 IN |
| Volume | 33.649 CI |
| Weight | 0.001 LB |
| Length | 2.3 IN |
| Width | 3.08 IN |
| Height | 4.75 IN |
| Weight | 0.001 LB |
