Product Overview
Eaton Wiring Devices SDC15-V Fan/Dim Comb Sld SP 3Spd 1.5A 300W IV
Eaton dimmer and fan speed control, No neutral required, #14 -12 AWG, Flush, 120 Vac, Back and side, Maintained, Ivory, 60 Hz, Incandescent, MLV, ELV, Fan, Halogen, Single-pole, Single pole, Single-phase, Polycarbonate, 300W 663246
Eaton’s fan controls vary the speed of air flow and employ special circuitry to quiet the fan's motor at low speeds. Install the device in place of a standard switch to add convenient fan control with quiet, smooth actuation. Tri-combo and ground screws help allow easy accesibility and installation. The top and back body are virtually unbreakable, and the device features electrostatic discharge protection, radio frequency interface filtering, and power failure memory. Eaton fan controls are available with color change kits and are compatible with traditional-style or screwless wallplates.
| Closure Type | Maintained |
| Color | Ivory |
| Connection Type | Back | Side |
| Frequency Rating | 60 Hz |
| Load Type | MLV | HAL | Fan | INC | ELV |
| Material | Polycarbonate |
| Mounting method | Flush |
| Mounting Type | Flush |
| Number Of Poles | Single-pole |
| Number of Ways | Single-way |
| Phase | Single-phase |
| Power consumption | 300 W |
| Special Features | No neutral required |
| Torque rating | 14 lbf-inch |
| Voltage Rating | 120 V |
| Wiring Method | Back and side |
| Length | 2.05 IN |
| Width | 2.08 IN |
| Height | 4.31 IN |
| Volume | 18.378 CI |
| Weight | 0.28 LB |
| Length | 2.05 IN |
| Width | 2.08 IN |
| Height | 4.31 IN |
| Weight | 0.28 LB |
