Product Overview
Fasco D474 1/10 HP Condenser Fan Motor 1550 RPM 115/208-230V 42 Frame Replaces GE 2142
- Condenser Fan - Heat Pump Motor
- 5" Diameter - 42 Frame
- Permanent Split Capacitor (PSC); Capacitor Required: 3 Mfd-370 Volts (Not Supplied with Motor)
- Thermally Protected
- Shell Totally Enclosed, Shaft End and Opposite Shaft End Frame Open, Air Over
- Class B Insulation, 40°C Ambient
- Sleeve Bearing
- 3/8" Diameter Shaft with Flat
- 30" Leads
- Resilient Ring Mounting, Belly Band
General Specifications
| UPC: | 818508020129 | Weight: | 9.00 LB |
| Packaged Length: | 6.31 IN | Packaged Width: | 6.13 IN |
| Packaged Height: | 15 IN |
Nameplate Specifications
| Output HP: | 1/10 Hp | Output KW: | 0.07 kW |
| Frequency: | 60 Hz | Voltage: | 115/208-230 V |
| Current: | 1.9/1.0 A | Speed: | 1550 rpm |
| Service Factor: | 1 | Phase: | 1 |
| Duty: | Continuous | Insulation Class: | B |
| Frame: | 42 | Enclosure: | Open Air Over |
| Thermal Protection: | Automatic | Ambient Temperature: | 40 °C |
| UL: | Recognized | CSA: | Y |
| CE: | N |
Technical Specifications
| Electrical Type: | Permanent Split Capacitor | Starting Method: | Across The Line |
| Poles: | 4 | Rotation: | Reversible |
| Mounting: | Resilient Rings | Drive End Bearing: | Sleeve |
| Opp Drive End Bearing: | Sleeve | Frame Material: | Rolled Steel |
| Shaft Type: | Flat | Overall Length: | 8.63 in |
| Frame Length: | 4.38 in | Shaft Diameter: | 0.375 in |
| Shaft Extension: | 3.25 in |
Direct replacement for
| GE | 2131 |
|---|---|
| GE | 2132 |
| GE | 2141 |
| GE | 2142 |
| Acme Miami | DB2E011 |
| Acme Miami | DB2E011N |
