Product Overview
Fireeye UV1A6 UV Scanner 1/2" NPT Connector 6' flex Conduit (1800 MM) Replaces UV1
Part Description:
- Ultraviolet Flame Scanner
- Item Ultraviolet Flame Scanner, Non Self-Checking
- Used On Flame-Monitor, BurnerLogix and Nexus System, M-Series, M-Series II, MicroM, FlameWorx, MB-2 and D-Series Control
- Overall Dimension 1.06 Inch Diameter x 2.53 Inch Length
- Voltage Rating 560 Volt AC 50/60 Hertz
- Connector Type 1/2 Inch Threaded Straight
- Lead Type 72 Inch Shielded
- Enclosure Rating NEMA 4X
- Tube Material Quartz
- Temperature Rating -40 to 200 Deg F
- Approval UL (Canada and US), FM, CE
Part Number: UV1A6
Features / Benefits
- The UV Tube is Made of Quartz and is Filled with a Gas that Ionizes When Struck by UV Radiation from the Flame
- In the Absence of UV Radiation, the Gas Acts as an Insulator Between Two Electrodes Which are Mounted Inside the Tube
- These Electrodes are Energized Continuously by a High Voltage
- During Combustion, UV Radiation Ionizes the Gas, Causing Current Pulses to Flow Between the Electrodes
- These Current Pulses Result in a Flame Signal Which is Transmitted to the Amplifiers in the Control, Where it is Processed to Energize or Hold in the Flame Relay
