Product Overview
UEI 520KIT Electric Furnace Install Kit
This Kit provides the recommended test instruments required by electric furnace start up manuals for proper installation and maintenance. Most equipment warranties require initial install readings to be documented upon installation.
520KIT is packed in our UEi Tool Backpack. Built rugged, waterproof base, two compartments with inner pocket options and includes D-clip.
This equipment helps confirm:
Manufacturer requirements to maintain warranty
CFM via external static pressure test
Gas flow pressure
System is safe from gas leaks
Proper high voltage to power supply and ground
Low voltage meets wiring diagram requirements
| Meter | DL579 |
| Leak Detector | CD100A |
| Manometer | EM201SPKIT |
| Thermometer | PDT650 |
| Tool Backpack | AC550 |
| TRMS | Yes |
| AC Volts | 750VAC |
| DC Volts | 1000VDC |
| AC current (amps) | 600A AC |
| AC micro current (amps) | 2000µA |
| DC micro current (amps) | 2000µA |
| DC micro volts | 600mV |
| AC micro volts | 600mV |
| Resistance (Ohms) | 60MOhms |
| Capacitance (Farads) | 6000µF |
| Frequency (Hertz) | 99.99kHz |
| Duty cycle | 1.0 to 99.0% |
| Temperature | -328Ëš to 2462ËšF |
| Continuity | Yes |
| Diode | Yes |
| NCV Detection | Yes |
| Pressure | ±60 InH2O |
| Differential Temperature | Yes (PDT655) |
| Detects | Combustible Gas |
| Detection Senisitivity | < 50ppm methane |
| LRA Inrush | Yes |
| Low Z | Yes |
| Ingress Protection | IP42 |
| ETL listed | cETLus |
| IEC 61010 | 61010-1: 2012 |
| CE Conformity | Yes |
| CAT Rating | CATIV 300V / CATIII 600V |
| RoHS | Yes |
| FCC/IC Compliant | FCC |
