Product Overview
UEI 522KIT Oil Burner & Boiler Install Kit
This Kit provides the recommended test instruments required by Oil Burner & Boiler start up manuals for proper installation and maintenance. Most equipment warranties require initial install readings to be documented upon installation.
522KIT is packed in this UEi Tool Backpack. Built rugged, waterproof base, two compartments with inner pocket options and includes D-clip.
This equipment helps confirm:
Manufacturer requirements to maintain warranty
Combustion analysis for fuel efficiency
Heat exchanger integrity
Smoke level in the flue gases
CFM via external static pressure test
Gas flow pressure
System is safe from gas leaks
Proper high voltage to power supply and ground
Low voltage meets wiring diagram requirement
| Up to 10 Year warranty with annual recertification | Yes |
| Eligible for UEi Service+ | Yes |
| 2 Types of sensor protection | Yes |
| NOx Filtered | Yes |
| Low Flow Detection | Yes |
| Hold | Yes |
| Min/Max | Yes |
| Auto power off | Yes |
| Display count | 6000 |
| Backlight | Yes |
| Dual display | Yes |
| Temperature Inputs | K-Type |
| Temperature differential | Yes |
| Wireless output | Yes |
| Protective boot or overmolding | Yes |
| Dual Pressure Input | Yes |
| Differential pressure | Yes |
| Preprogrammed Fuels | 8 |
| Start time | 30 sec. |
| High altitude compensation | Yes |
| Memory Positions | 45 |
| Zero | Yes |
| Selectable units | Yes |
| Magnetic mount | Yes |
| Warranty | Various |
| Recording/Data Logging | Yes |
| Hi-Resolution accuracy | Yes |
| K-type input | Yes |
| Digital | Yes |
| Automatic fresh air purge | Yes |
| Number of display parameters | 6 |
| IR printer link | Yes |
| TRMS | Yes |
| AC Volts | 750V AC |
| DC Volts | 1000V DC |
| AC current (amps) | 600A AC |
| AC micro current (amps) | 2000µA |
| DC micro current (amps) | 2000µA |
| DC micro volts | 600mV |
| AC micro volts | 600mV |
| Resistance (Ohms) | 60M Ohms |
| Capacitance (Farads) | 6000µF |
| Frequency (Hertz) | 99.99kHz |
| Duty cycle | 1.0 to 99.0% |
| Temperature | -328Ëš to 2462ËšF |
| Continuity | Yes |
| Diode | Yes |
| NCV Detection | Yes |
| CO | 2000ppm |
| CO2 | 20% |
| O2 | 21% |
| Flue temperature | 32Ëš to 1112ËšF |
| Inlet temperature | 32Ëš to 1112ËšF |
| Heat exchanger test | Yes |
| Pressure | ±60 InH2O |
| Differential Temperature | Yes |
| Detects | Combustible Gas |
| K-type Temperature Range | -40Ëš to 950ËšF (-40Ëš to 510ËšC) |
| Detection Senisitivity | < 50ppm methane |
| LRA Inrush | Yes |
| Low Z | Yes |
| Ingress Protection | IP42 |
| ETL listed | cETLus |
| IEC 61010 | 61010-1: 2012 |
| CE Conformity | Yes |
| CAT Rating | CATIV 300V / CATIII 600V |
| RoHS | Yes |
| FCC/IC Compliant | FCC |
| REACH Compliant | Yes |
| AHRI 1260 Standard | Yes |
| Certification | The C161 is independently tested and certified to EN 50379, Parts 1-3 in accordance to 1st German Federal Emission Control Ordinance (BlmSchV) |
| EMC | EN50270:2015 |
| Safety | EN61010-1:2010 |
| Combustion Analyzer | C161 |
| Meter | DL579 |
| Manometer | EM201SPKIT |
| Leak Detector | CD100A |
| Thermometer | PDT655 |
| Batteries | AAA (2), 9V, CR2032, Rechargeable AA (3) |
| Smoke Pump Test Kit | SPT1 |
| Tool Backpack | AC550 |
